Things You Should Know Before Making Changes to Your SSO Configuration


Before you set up or change single sign-on (SSO), turn on Brightidea Login so you can still sign in if SSO stops working. Use this article together with the Single-Sign-On (SSO) Setup Guide.

Turn on Brightidea Login before you change SSO

Where to find it: System Setup › Access › Authentication
  1. Go to System Setup > Access > Authentication.
  2. Select the Enable Brightidea Login checkbox.
  3. Select Save Changes.

The Enable Brightidea Login checkbox on the Authentication page

The Enable Brightidea Login checkbox on the Authentication page.

Good to know: If Brightidea Login is off and SSO fails during setup or after a change, you and your users can be locked out of the site.

Sign in if SSO locks you out

With Brightidea Login turned on, a failed SSO sign-in sends you to the Brightidea login screen. Reset your password there to get back in.

  1. On the Brightidea login screen, select Forgot password?
  2. Enter the email address that matches your SSO credentials.
  3. Open the password reset email and follow the link to create a new password.
  4. Sign in with your email address and new password.
  5. Go to System Setup > Access > Authentication, and correct your SSO configuration.

Turn off Brightidea Login when SSO works

  1. Confirm that users can sign in through SSO.
  2. Go to System Setup > Access > Authentication.
  3. Clear the Enable Brightidea Login checkbox.
  4. Select Save Changes.
Was this article helpful?
1 out of 1 found this helpful
Have more questions? Submit a request

Comments